HOW TO HOW TO MAKE A GREAT IMPRESSION FOR YOUR FATHER SEBASTIAAAN FANGS
VERY IMPORTANT : READ BEFORE MAKING YOUR IMPRESSION
Making a great impression is very easy and will determine the quality and fitting of your Father Sebastiaan Fangs. Here are some guidelines for you to get started.
Prep & Supplies
Brush and floss to clean your teeth thoroughly.
Wash your hands thoroughly before starting.
Do not wear gloves while making an impression.
Stand in front of a mirror or have a mirror handy.
Test fit the empty impression tray in your mouth. Make sure your rear teeth are covered by the back of the tray and that your teeth do not touch the side walls. If the tray does not fit you, contact us at fathersebastiaan@gmail.com and we will send you the correct size quickly.
Have your phone handy and use the timer for mixing the putty & loading the tray (1 minute) and for making the impression (3 ½ minutes).
Putty Mixing & Loading The Tray (1 minute)
Set your phone timer for 1 minute.
Mix the two putties for 45 seconds. The putty should be a solid color, not marbled.
Use the remaining 15 seconds to roll the putty into the shape of a slender cigar or hotdog, about 4.5“ to 5”. Then load the putty into the impression tray and spread it evenly to the side walls of the tray.
Making your impression (3 minutes)
Set your phone timer for 3 minutes.
Fit the filled tray into your mouth, making sure it is centered. Looking in the mirror will help with centering.
Use your fingers to press the tray evenly into your teeth. Make sure your teeth are covered up to your gum line and lightly touch the bottom of the tray. Do not bite down.
Use your thumbs to press the impression tray into your rear teeth.
Do not move the tray once you have covered your teeth. Continue to hold the tray in place to ensure the tray does not move.
Wait 3 ½ minutes before gently removing the tray.
Do not remove the impression material from the tray. Send the tray filled with the putty material back to ETERNAL FANGS.
An example of a great impression:
*If you feel that your impression isn't right, please send a picture to fathersebastiaan@gmail.com describing the problem and our technicians will perform a visual inspection to determine if you require a new kit.
Too Shallow
You need to bite deep enough into the putty to fully capture your gum line. It’s not enough to simply capture the tips of your teeth. Gently bite all the way down until you feel your teeth come in light contact with the bottom of the tray.
Impression Broken - Side Hit
Line up your teeth over the center of the tray before you bite down. If your teeth are too far to one side or too far forward or backward, you will hit the sides of the tray.
Improper Putty Mixing
The base and catalyst must be fully mixed so it’s one solid color. If there are any swirls of the original putty colors, the putty won’t fully set, so it can’t completely capture your impressions. Always be sure to mix thoroughly until you’ve achieved one solid color.
Removed Too Early
The tray needs to remain in your mouth for at least 3.5 minutes. If you take it out too early, your teeth will drag along the putty, distorting the length of your teeth and your gum line.
Tray Moved
Keep your tray steady when taking impressions. Otherwise, you can create a double imprint of your teeth and gums, or your teeth can scrape along the putty, distorting their actual length and shape. Once you feel the putty on your gums and your teeth have come in light contact with the bottom of the tray, don’t move or adjust the tray. If you need to stabilize the tray, use your thumbs to gently hold the top tray in place.
